| CAS：** |
BT-104 Enameled Wire Stripper
特性（Characteristics）
1. BT-104 Enameled Wire StripperBe applicable to depainting for motor,transformer, voice coil of the line of AI (200), PI (220),andother high temperature enameled wire;
2. BT-104 Enameled Wire StripperMust be heated to 380 - 450 ℃;
3. BT-104 Enameled Wire Stripper Environmental protection (qualified by RoHs test), fast, 3 - 5 seconds to remove.
操作参数（Technical parameters）
BT－104 Enameled Wire Stripper is a whitepowder;
操作流程（Technical process）
Enamelled wire→Immersed in the solution（heated to 380 – 450℃ ）,10 - 20 seconds
→ wash the wire→ immersed inthe BT－122 → wash → solder
以上价格为不含税价
注意事项（Attention）
1. Asthis product is used in high temperature conditions,you should pay moreattention for safety,you should wear protective gloves, protective clothing,masks, glasses, avoid to contact with skin, eyes, if you are injured,flush withwater immediately (severe required medical diagnosis);
2.When the heating is beginning, you should cover thecontainer with metal to avoid heating up the melt which due to the unevenheating of the stripping pink splash; Don’t use it until the stripping powderis fully melted and then open the lid;
3.After stripping, youshould seal the container to avoild the powder absorb water from air. If not,the water will boiling and splash next time.which make the efficiency ofstripper lower.
DongGuan Bont Surface-Treatment Material Co., Ltd
2F,JinTai ManagementDistrict Building,jinqu Road,wanjiang Town,Dongguan City
上海分公司 Tel:+8621 62962058 / 33581488 FAX:+86 2133581488
